Difference between revisions of "Journal:Potential of NIRS technology for the determination of cannabinoid content in industrial hemp (Cannabis sativa L.)"
Shawndouglas (talk | contribs) (Created stub; saving and adding more.) |
(No difference)
|
Revision as of 15:14, 10 May 2022
Full article title | Potential of NIRS technology for the determination of cannabinoid content in industrial hemp (Cannabis sativa L.) |
---|---|
Journal | Agronomy |
Author(s) | Jarén, Carmen; Zambrana, Paula C.; Pérez-Roncal, Claudia; López-Maestresalas, Ainara; Ábrego, Andrés; Arazuri, Silvia |
Author affiliation(s) | Universidad Pública de Navarra, Genscore Navarra S.L. |
Primary contact | Email: cjaren at unavarra dot es |
Year published | 2022 |
Volume and issue | 12(4) |
Article # | 938 |
DOI | 10.3390/agronomy12040938 |
ISSN | 2073-4395 |
Distribution license | Creative Commons Attribution 4.0 International |
Website | https://www.mdpi.com/2073-4395/12/4/938/htm |
Download | https://www.mdpi.com/2073-4395/12/4/938/pdf (PDF) |
This article should be considered a work in progress and incomplete. Consider this article incomplete until this notice is removed. |
Abstract
Industrial hemp (Cannabis sativa L.) is a plant native to Asia and is considered to be a primary source of food, textile fiber, and medicines. It is characterized by containing minimal concentrations of Δ9-tetrahydrocannabinol (THC), which is the main psychoactive chemical component, and cannabidiol (CBD), a non-psychoactive substance. In most European countries, the maximum concentration legally allowed for cultivation is 0.2% of THC, and it is currently under debate whether to increase this level to 0.3%. Moreover, in many countries its production is being regulated and legalized, increasing the need for a rapid analysis method.
The present work evaluated the cannabinoid content in hemp using near-infrared spectroscopy (NIRS) technology in combination with chemometric techniques. For this, several samples of the Kompolti variety were analyzed. Samples were dried and ground, and the content of total THC (%) and total CBD (%) was determined by high-performance liquid chromatography (HPLC) with a diode array detector for reference measurements, and then the spectra were collected by NIRS. Principal component analysis and partial least square regression models were developed. Good coefficients of determination of cross-validation of 0.77 for THC and CBD, and a ratio of prediction to deviation >2 for total THC and CBD, were achieved. The results obtained show that NIRS technology has potential for the quantitative determination of cannabinoids. Therefore, this analytical method would allow a simpler, more robust, precise, and sustainable estimation than the current HPLC approach.
Keywords: CBD, THC, near infrared spectroscopy, quantification, HPLC, chemometrics
Introduction
Notes
This presentation is faithful to the original, with only a few minor changes to presentation. Some grammar and punctuation was cleaned up to improve readability. In some cases important information was missing from the references, and that information was added.